Download User's Guide VacSimHigh Vacuum System - INTEC
Transcript
shown here to save complexity in the presentation. The electron column is shown as a straight pipe. The restriction of pumping speed by spray apertures and other features is represented as a single aperture. Two plotters are included, a dual pen plotter which shows the pressures, respectively in the chamber and in the gun, and a single pen plotter which shows the total oil mass passed into the chamber by the diffusion pump. This diffusion pumped high vacuum system was replaced in the mid 1970s by a much simplified turbo pumped system, shown as the second example. Turbomolecular pump prices, and their reliability had improved to the point where an imaginative SEM manufacturer was able to take the plunge. At that time the turbo pump was not accepted generally as a reliable staple of high vacuum systems. The move was a brave one. The component count reduction can be seen by comparing the pictorial schematics, and more dramatically by comparing the VacSim schematics for the two systems. This move radically reduced manufacturing costs and radically improved system reliability. The change also imroved performance by reducing oily contamination in the SEM chamber and 51