Download Kontron User's Guide
Transcript
9 System Ressources 9.3 Memory Area Upper Memory Used for Available C0000h – CFFFFh D0000h – DDFFFh DE000h – DFFFFh E0000h – FFFFFh VGA BIOS No Yes No No 9.4 USB registers System BIOS Comment shadow RAM (ISA bus restriction) I/O Address Map The I/O-port addresses of the COMe-bCD2 are functionally identical with a standard PC/AT. The following I/O ports are additionally used: I/O Address Used for 4e-4fh 2F8-2FFh 3F8-3FFh Winbond external I/O controller TPM COM1 COM2 1000h > PCI 2e-2fh 9.5 Available Comment No Available if external I/O controller not used. No No No Available if TPM not populated. Available if device is disabled in setup Available if device is disabled in setup I/O ports 1000h and above might be allocated by PCI devices or onboard hardware. No Peripheeral Component Interconnect (PCI) Devices PCI Device Busmaster Audio, USB and Ethernet Note: 9.6 PCI Interrupt Comment See IRQ resource tables above Integrated in the Intel chipset. No REQx/GNTx pair needed. You can use REQ0/GNT0, REQ1/GNT1, REQ2/GNT2, and REQ3/GNT3 pairs for external PCI devices. Inter IC (I2C) Bus I2C Address Used For Available Comment JIDA-Bus-Nr. A0h A2h B0h JIDA-EEPROM JIDA-EEPROM WD-PIC No No No EEPROM for CMOS data. 0 0 0 Kontron User's Guide ETXexpress® CD Reserved for internal use. 46