Download Kontron User's Guide

Transcript
9 System Ressources
9.3
Memory Area
Upper Memory
Used for
Available
C0000h – CFFFFh
D0000h – DDFFFh
DE000h – DFFFFh
E0000h – FFFFFh
VGA BIOS
No
Yes
No
No
9.4
USB registers
System BIOS
Comment
shadow RAM (ISA bus restriction)
I/O Address Map
The I/O-port addresses of the COMe-bCD2 are functionally identical with a standard PC/AT.
The following I/O ports are additionally used:
I/O Address
Used for
4e-4fh
2F8-2FFh
3F8-3FFh
Winbond external
I/O controller
TPM
COM1
COM2
1000h >
PCI
2e-2fh
9.5
Available
Comment
No
Available if external I/O controller not used.
No
No
No
Available if TPM not populated.
Available if device is disabled in setup
Available if device is disabled in setup
I/O ports 1000h and above might be allocated by PCI devices or
onboard hardware.
No
Peripheeral Component Interconnect (PCI) Devices
PCI Device
Busmaster
Audio, USB
and Ethernet
Note:
9.6
PCI Interrupt
Comment
See IRQ
resource tables
above
Integrated in the Intel chipset. No REQx/GNTx
pair needed.
You can use REQ0/GNT0, REQ1/GNT1, REQ2/GNT2, and REQ3/GNT3 pairs for external PCI devices.
Inter IC (I2C) Bus
I2C Address
Used For
Available
Comment
JIDA-Bus-Nr.
A0h
A2h
B0h
JIDA-EEPROM
JIDA-EEPROM
WD-PIC
No
No
No
EEPROM for CMOS data.
0
0
0
Kontron User's Guide ETXexpress® CD
Reserved for internal use.
46