Download Installation and Operating Instructions

Configuring the Switching Combination
You can set a switching combination for each power socket. This has the advantage that, for
example, you can setup a slot when the temperature is too high. This is only possible when
you also use a CMC-TC temperature sensor.
1
2
5
3
4
6
7
8
1
Select the required sensor using the pull-down menu.
2
Now select the status when the socket is to switch.
3
If you want to add a second sensor for switching the output, select an And or Or
operation from the pull-down menu.
4
Select the second sensor from the pull-down menu.
5
Now select the status for the second sensor alarm when the socket is to switch.
6
Use the pull-down menu to decide whether the output should switch itself on or off.
7
If you want to discard your inputs, click the Reset button.
8
To accept and save your inputs, click the Accept button.
109 / 113