Download Installation and Operating Instructions

Configuration of the Voltage Monitoring for the Voltage Monitor with IEC Switching
Output (7320.610)
You can configure the voltage monitor as required. You can use this voltage monitor to
monitor a voltage against limits. In addition, you can deactivate or activate the power socket
of the voltage monitor when various limits are reached. The configuration of the switching
combinations is described on page 82.
1
2
3
4
5
6
7
1
Select the tab to which the voltage monitor is connected.
2
Specify a unique name for the voltage monitor. This is important should you use
several voltage monitors.
3
Enter here the voltage upper limit for the main alarm.
4
Enter here the voltage limit for the prealarm.
5
Enter here the lowest voltage limit.
6
If you want to discard your inputs, click the Reset button.
7
To accept and save your inputs, click the Accept button.
80 / 113