Download Installation and Operating Instructions

Voltage Monitor with IEC Switching Output Configuration (7320.610)
You can configure the voltage monitor as required. This is carried out as follows.
2
1
3
4
5
6
7
8
1
Select the next tab to which the voltage monitor is connected.
2
Specify a unique name for the voltage monitor. This is important should you use
several voltage monitors.
3
If you require an automatic switching pulse for ON->OFF->ON, you can enter the
pulse time here. The pulse is initiated when OFF is pressed.
4
The switching setting of the voltage monitor in the case of a timeout of the I/O unit is
set here (stay, switch off, switch on).
5
You can also set switching combinations. This is described on the next page.
6
You can manually switch the switch output. This is done by selecting ON or OFF.
7
If you want to discard your inputs, click the Reset button.
8
To accept and save your inputs, click the Accept button.
81 / 113