Download Addonics Technologies MSCFASA User's Manual
Transcript
T E C H N O L O G I E S User Guide Internal mSATA SSD / CFast card Reader/Writer (MSCFASA, MSCFA2SA) www.addonics.com Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.com/support/query/ Unpacking and Overview mSATA Adapter SATA port 4 pin floppy power connector Power & Drive Activity LED CFAST Adapter Micro SATA DigiDrive (MSCFASA) 18” SATA Cable (MSCFA2SA: Qty 2) Dual Micro SATA DigiDrive (MSCFA2SA) LED information The Power & Drive Activity LED glows green to indicate power and blinks red to indicate drive activity. CONTACT US www.addonics.com Phone: Fax: Email: 408-573-8580 408-573-8588 http://www.addonics.com/sales/query/ Installation 1. Slide your mSATA SSD into the adapter. 2. Install the adapter and card into the mounting bracket as shown. 3. Completed assembly is suitable for mounting the same way as a 2.5” hard disk, including connector position and mounting taps. Hot Swapping This unit supports hot swapping (inserting or removing drives while the drives are running and connected to a computer). The SATA controller on the computer must also support hot swapping - be sure to confirm this before attempting to insert or remove drives while the system is running. Also be sure to practice the appropriate safe removal procedure before proceeding. Failure to practice safe removal procedures will result in loss or corruption of data.