Download Draytek Vigor2130
Transcript
Adding a VPN Tunnel for PPTP Click Add Tunnel to open the following page. Available settings are explained as follows: Item Description Dial-Out General Setting Enabled - Check here to activate this tunnel. Always On - Check this box to make the WAN connection being activated always. Name - Specify a name for this tunnel. Remote IP - Enter the IP address/name of the remote host that located at the other-end of the VPN tunnel. Authentication User Name - Type a name for this tunnel for authentication. Password - Type a password for this tunnel for authentication. MPPE - Check this box to enable the function of MPPE for such tunnel. Networks Local Network / Mask - Traffic between this subnet and the subnet specified in Remote Network / Mask will travel through the VPN tunnel. Remote Network / Mask - Add a static route to direct all traffic destined to this Remote Network IP Address/Remote Network Mask through the VPN connection. 180 Vigor2130 Series User’s Guide