Download ExtremeWare Software User Guide

DISPLAYING FDB ENTRIES
DISPLAYING FDB ENTRIES
To display FDB entries, use the command
show fdb {<mac_address> | vlan <name> | <portlist> | permanent | qos}
where the following is true:
• mac_address — Displays the entry for a particular MAC address.
• vlan <name> — Displays the entries for a VLAN.
• portlist — Displays the entries for a slot and port combination.
• permanent — Displays all permanent entries.
• qos — Displays all entries that are associated with a QoS profile.
With no options, the command displays all FDB entries.
REMOVING FDB ENTRIES
You can remove one or more specific entries from the FDB, or you can clear the entire
FDB of all entries by using the commands listed in Table 6-2.
Table 6-2: Removing FDB Entry Commands
Command
Description
delete fdbentry <mac_address> vlan <name>
Deletes a permanent FDB entry.
clear fdb {<mac_address> | vlan <name> |
<portlist>}
Clears dynamic FDB entries that match the
filter. When no options are specified, the
command clears all FDB entries.
EXTREMEWARE SOFTWARE USER GUIDE
6-5