Download Mitel 5001 User guide

Programming
1. Click Extensions and then click Hunt Map.
2. Select the extension and click Change.
3. Select the line groups that you want this extension to
have access to.
If the outgoing access digit is set to Any Line, when
the user at this extension dials the outgoing access
digit, the system hunts for a free line in the line group
that you assigned against Entry 1. If a line is not
available, it will hunt for a line in the line group against
Entry 2.
In order to make outgoing calls, each extension must
be assigned to at least one hunt map.
4. Click Save.
Define the outgoing line access digit
By default users dial 9 to access an external line. If you
want to change the leading digit for accessing an
outgoing line or add another out access digit, you must
change it in the Out Access form and in the Numbering
Plan form.
Program the analog lines
The default configuration allows all calls to be routed to
extension 1000 in pbx mode, or to all extensions in key
system mode.
Ring maps determine which extensions or extension
groups receive the incoming calls from a line. Ring maps
are configured on a per-line basis. Every line requires a
ring map.
To customize your configuration, you will need to
program the
•
analog line parameters
•
ring maps
•
ring map types
57