Download Microcom 466 User manual

NANO-GX User Manual
Figure 4-4: COM 1/2 RI and Voltage Select Jumper Pinout Location
4.3.3 CRT/LCD Mode Select
Jumper Label:
JP3
Jumper Type:
3-pin header
Jumper Settings:
See Table 4-4
Jumper Location:
See Figure 4-5
The CRT/LCD Mode Select jumper allows the video mode of the NANO-GX to be
selected. The CRT/LCD Mode Select jumper settings are shown in Table 4-4.
JP3
Description
1-2
LCD MODE
2-3
CRT MODE
Default
Table 4-4: CRT/LCD Mode Select Jumper Settings
The CRT/LCD Mode Select jumper location is shown in Figure 4-5.
Page 69