Download Simrad SP60 - REV D Installation manual

Simrad SP60
Objects
The Objects menu is shown in all display modes, and displays
the range (R), bearing (B) and depth (D) to all selected objects.
The identification (ID) abbreviations for the different objects
are:
AT - Automatic Target Track Marker
Ci - Circle Marker
M - Target Marker
OS - Own Ship Marker
PT - Position Track Marker
F - Radio buoy marker (if a GPS buoy system is connected)
The number behind the ID abbreviation refers to the same
number on the object in the sonar presentation. The P after the
Automatic Target Track Marker indicates the priority level
where the audio channel is locked to the target.
When selecting an object in the list, a list with all the available
object data will be shown below the Objects menu.
When selecting a Target Marker, Automatic Target Track
Marker or a Radio Buoy Marker in the list, a dotted bearing
line from the vessel to the marker will be presented.
To delete an object, select the relevant marker in the list, and
press the Delete button in the lower part of the menu. Pressing
the Delete All button will delete all objects.
The parameters for each marker are shown in the Inspect
Object parameter dialogue.
Related topics
→
62
Inspect Object, page 110
850-164575 / Rev.D