Download Cabletron Systems BRIM-E6 Specifications

Transcript
Console Commands
Client
Output Parameter
Description
[LECS Address] </d>
ATM address of the LECS.
[LES Address] </d>
ATM address of the LES.
[LAN Type] </d>
Type of ELAN.
[MTU] </d>
Maximum transfer unit assigned for this client.
[IP NetMask] </d>
IP netmask assigned to the client.
Descriptions
Operator
Parameters/Permissions
Description
activate
client
[ClientNumber] <clientnumber>
Activates a client on the switch (same as the restart
command).
deactivate
client
[ClientNumber] <clientnumber>
delete
[ClientNumber] <clientnumber>
client
Administrator
restart
[ClientNumber] <clientnumber>
client
Administrator
show client
[ClientNumber] <clientnumber>
(/d)
All
Administrator
client
Deactivates a client on the switch.
Administrator
Removes a client from the switch.
Restarts a client on the switch. If a client fails to successfully
join a VLAN, you can restart the client to retry. The switch
software, on a periodic basis, automatically tries to restart
clients that have not successfully joined. Enter show client
to confirm that the client(s) have restarted.
Displays the details of a client on the switch. You can obtain
more details of all the clients on the switch by adding /d to
the end of the command. For example, show client /d.
SmartSwitch ATM Switch Reference Manual 2-45