Download Maxtor 4W040H3 System information

5.3 REC SETTING
This page allows you to set recording rate and recording quality, and to enable you to continue recording
when the disk is full.
MAIN MENU
REC SETTING
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
REC RATE
REC QUALITY
DISK FULL
MULTIPLEXER
GOTO REC PAGE
SET REC RATE
: 60 F/S
: HIGH
: REWRITE
: ON
MAIN PAGE
REC RATE:
This option is for adjusting the number of pictures recorded every second into a storage disk. The
recording rate controls the frequency at which the number of video pictures can be recorded. For a
NTSC unit, there are 10 different recording rates you can select from: 60F/S (60 fields per second),
20F/S, 10F/S, 5F/S, 2.5F/S, 1.25F/S, 0.625F/S, 1 F/4S, 1F/6S, and 1F/8S. For a PAL unit, there are
two different sets of recording rates for use with a camera or a multiplexer, respectively. Please refer to
the table in section 4.1 for details.
REC QUALITY:
This option determines the image quality to be recorded. The DVR stores images in the compressed
format and allows the image quality to be altered by the image size. There are 3 levels of image quality
you can select from: HIGH, STANDARD, and BASIC. Selecting the HIGH image for use will have
higher-resolution recorded images, and normally takes up more storage space than a STANDARD or
BASIC image does.
DISK FULL:
This option determines the way to utilize storage media in case of a full disk.
REWRITE: When the hard-disk drive is full, the device continues recording by displacing the old
data.
STOP: When the hard disk drive is full, the device will stop recording.
MULTIPLEXER:
For optimum image recording please set this option to ON when the DVR connected with a multiplexer
for use. Set this option to OFF when only it is connected with a single camera.
30