Download Simrad PI GEOMETRY - QUICK REFERENCE GUIDE REV B Installation manual

Parameters
Range
Dialog description
The Range parameter dialog opens when you click the Range
button in the Horizontal, Vertical and Vertical 180 menus.
Horizontal and vertical ranges are normally selected using the
buttons on the Operating Panel. You can also control these
settings directly using this parameter dialog. The available
choices are listed in the dialog.
In addition to the read-out on the menu, the current horizontal
range is normally displayed over the tilt indicator in the upper,
left-hand corner of the display.
For more information about the range settings made on the
Operating Panel, see ’Range’ field on page 86.
Range dialog options
•
[Range]: Click to select manual range.
Available ranges are 50, 75, 100, 150, 200, 300, 400, 500,
600, 750, 1000, 1200, 1500 and 2000 meters.
•
Manual: Click to enable manual range selection.
•
Auto: Click to enable automatic range selection during
position- and target tracking. This allows for optimal tracking.
•
Close: Click to close the parameter dialog.
•
Help: Click to access the on-line help.
To maintain a steady display during seine setting, the lower
automatic range is set to 450 meters. Changing the range or
pressing the Manual button will stop the automatic ranging
function. The sonar is designed to work with various horizontal
range units such as meter, nautical mile, US survey feet or yards.
This choice can be made by pressing the Units button in the
Display menu.
Related topics
323775/B
•
Horizontal menu on page 93
•
Vertical menu on page 95
•
Vertical 180 menu on page 96
•
Units on page 173
151