Download Comtech EF Data SDM-650B Specifications

SDM-300L3 Satellite Modem
Front Panel Operation
Revision 0
MN/SDM300L3.IOM
Note: This menu is displayed only when the Turbo option is installed.
Displays the Turbo module firmware version.
FUNCTION SELECT: UTILITY: SYSTEM: DEMO MODE
DEMO MODE
OFF
Displays the status of the Demo Mode as either On or Off. Enables all the FAST options
for the hardware installed for 1 hour.
FUNCTION SELECT: UTILITY: SYSTEM: EXT AGC: MAX PWR
EXT AGC: MAX PWR
0.0 Volts
Sets the AGC voltage for a RX signal. The voltage range is 0.0 to 10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press <ENTER> to execute
the change.
FUNCTION SELECT: UTILITY: SYSTEM: EXT AGC: MIN POWER
EXT AGC: MIN PWR
10.0 Volts
Sets the AGC voltage for a RX signal. The voltage range is 0.0 to 10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press <ENTER> to execute
the change.
4–106