Download documentation - PassMark Software

164
11
BurnInTest V7.0
Test hardware
Testing system components may require additional hardware. This includes:
Sound test
Audio loopback cable
Disk test
eSATA
FireWire
Optical drive test
Optical drive test media
Parallel port test
Parallel loop back plugs
Serial port test
Serial loop back plugs
USB test
USB loop back plugs
11.1
Audio loop back cable
(Applicable to BurnInTest Pro version only)
PassMark audio loopback cables contain two 3.5mm gold plated stereo plugs which connect
the Audio out and microphone in ports of your sound card during sound card loopback
testing.
The following are the cable specifications.
Dimensions:
Total length: 330mm ± 0.5mm
Plug length: 14mm ± 0.5mm
Plug diameter: 3.5mm
Conductors:
American wiring gauge: (26(10/0.12)x2F, 0.43mm diameter
Insulation: PBC, 1.0mm diameter
Shielding:
Spiral shield: Bare copper wire, 30/0.10
Sheath:
Material: PVC
Color: Black
© 1999-2012 PassMark Software