Sharp Notevision XG-MB67X Setup guide Download

Transcript
Rear View
Terminals Refer to “INPUT Terminals and Connectable Main Equipment” on page 21.
25
OUTPUT (INPUT 1, 2)
terminal
(Shared computer RGB and component
signals output terminal for INPUT 1 and 2)
Terminal for connecting a monitor.
AUDIO (INPUT 1, 2)
terminal (Shared for
INPUT 1 and 2)
24
23
24
INPUT 1 and
23
INPUT 2 terminals
24
Terminals for
25
computer RGB
and component
signals.
RS-232C
terminal
Terminal for
controlling the
projector using
a computer.
27
LAN terminal
Terminal for
controlling the
projector using
a computer via
network.
(Shared for
INPUT 3 and 4)
INPUT 4 terminal
Terminal for
connecting video
equipment.
Exhaust
vent
52
25
46 Speaker
52
27
Rear adjustment
foot
26
24 AUDIO (INPUT
25 3, 4) terminal
AUDIO OUTPUT 21
terminal
Audio output terminal of
equipment connected to the
AUDIO INPUT terminal.
Intake vent
INPUT 3 terminal
Terminal for connecting video equipment
with an S-video
terminal.
31
Kensington Security
Standard connector
AC socket
Connect the supplied
Power cord.
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington
MicroSaver Security System. Refer to the information that came with the system for
instructions on how to use it to secure the projector.
13
XG-MB67XL_EN_CD_c
13
06.9.11, 6:44 AM
Introduction
Numbers in Z refer to the main pages in this operation manual where the topic
is explained.