Download Sharp Notevision XG-MB67X Setup guide

Transcript
Menu operation n Page 40
6 Selecting the Transmission
Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Selectable
items
9600bps
Description
8 System Lock Function
This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode in a safe place where only authorized users have access.
Transmission speed is slow.
Info
P
R
• If you lose or forget your keycode, contact your
nearest Sharp Authorized Projector Dealer or
Service Center (see page 63). Even if the product warranty is valid, the keycode reset will
incur a charge.
115200bps Transmission speed is rapid.
7 Fan Mode Setting
This function changes the fan rotation speed.
Selectable
items
1
Description
Normal
Suitable for normal environments.
High
Select this when using the projector at
altitudes of approximately 1,500
meters (4,900 feet) or more.
When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.
9 Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Lamp usage condition
“Life”
Remaining lamp life
100%
a Setting/Changing the keycode
Select “System Lock”, then press
hENTER or Q.
• The screen for entering the keycode
appears.
2
Press the 4 buttons on the remote
control or on the projector to enter the preset keycode in “Old
Code”.
• When setting the keycode for the first
time, press R on the projector for four
times.
PRJ - ADJ
Setting the System Lock
Old Code
New Code
Reconfirm
– – – –
– – – –
– – – –
5%
Approx.
3,000
hours
Approx.
150 hours
Operated exclusively
with Lamp Setting set to
“Bright”
Approx.
2,000
hours
Approx.
100 hours
Note
• If you input a wrong keycode, the cursor
returns to the first point of the “Old Code”.
• The preset keycode is 4 R buttons on
the projector. When you press the R button four times, the keycord input screen
disappears.
Useful
Features
Operated exclusively
with Lamp Setting set to
“Eco +Quiet”
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the usage condition.
47
XG-MB67XL_EN_CD_k
47
06.9.11, 6:50 AM