Download Sharp Notevision XG-MB67X Setup guide

Transcript
Picture Adjustment (“Picture” menu)
Menu operation n Page 40
Q Example: “Picture” screen menu for
INPUT 1 (RGB) mode
Picture
SCR
Picture Mode
Contrast
Bright
Red
Blue
CLR Temp
Bright Boost
Lamp Setting
Reset
SEL./ADJ.
PRJ
Q Example: “Picture” screen menu for
INPUT 3 mode
Net.
Help
Picture
Standard
0
0
0
0
7500K
1
Bright
ENTER
SCR
Picture Mode
Contrast
Bright
Color
Tint
Sharp
CLR Temp
Bright Boost
Progressive
Lamp Setting
Reset
SEL./ADJ.
END
PRJ
Net.
Help
Standard
0
0
0
0
0
7500K
1
3D Progressive
Bright
ENTER
END
1 Selecting the Picture Mode
Selectable
items
Description
The default settings of each item when selecting Picture Mode
CLR Temp
Bright Boost
Lamp Setting
7500K
1
Bright
Presentation Brightens portions of image for
more enhanced presentations.
7500K
2
Bright
Movie
Gives natural tint to the
projected image.
6500K
0
Eco + Quiet
Game
Gives sharpness to the
projected image.
7500K
2
Bright
*sRGB
For high fidelity reproduction of
images from a computer.
–
–
Bright
Standard
For standard image
• “sRGB” is displayed only when RGB signal is input.
• You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are
retained in memory.
Note
• You can also press G PICTURE MODE on the remote control to select the picture mode. (See
page 36.)
• *sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when “sRGB” is selected.
For additional information about the sRGB function, visit “http://www.srgb.com/”.
You cannot set the items, “Red”, “Blue”, “CLR Temp”, “Bright Boost”, when “sRGB” is selected.
Info
• When “sRGB” is selected, the projected image may become dark, but this does not indicate a
malfunction.
42
XG-MB67XL_EN_CD_j
42
06.9.11, 6:49 AM