Download Siemens SL42 User guide

Transcript
19.3.02
SL42-SL45-err-ger.fm
82
U35 /SL45i- English, A31008-H4860-A1-3-7619
Troubleshooting
Problem
Possible causes
Error message “Download error” appears
while you are downloading Java™ applications
Application-specific error message appears
during data transfer
from online Java™ applications
MultiMediaCard™
cannot be read.
Java™ standard Dial-in Ac- Configure the Java™ standard Dial-in Access corcess is configured incorrectly. rectly (see p. 69).
MultiMediaCard™
cannot be written to.
No connection to the
network
Phone loses network.
Calls not possible
Certain uses of the
phone not possible
Possible remedy
Java™ standard Dial-in Ac- Configure the Java™ standard Dial-in Access corcess is configured incorrectly. rectly (see p. 69).
Incorrect format, contacts
dirty
MultiMediaCard™ writeprotected
Signal weak
Outside GSM range
SIM card not valid
New network not authorized
1. Remove and replace MultiMediaCard™.
2. Clean contacts.
3. Switch the phone off and on again.
4. Format the MultiMediaCard™ (you will lose all
the data on the card).
Replace the MultiMediaCard™.
Move higher, to a window or open space.
Check Service Provider coverage map.
Use another phone to contact Service Provider.
Try manual selection or select different network
(see p. 67).
Network barring is set
Check barrings (see p. 67).
Network overloaded
Try again later.
Signal too weak
Reconnection to another Service Provider is automatic (see p. 67). Switching the phone off and on
again may speed this up.
Dialling error
New network not authorised (see p. 67).
2nd line set
Set other call line (see p. 66).
New SIM card inserted
Check for new restrictions.
Charge limit reached
Contact Service Provider or reset limit with PIN 2
(see p. 59).
Call restrictions are set.
Barrings may be set by your Service Provider. Check
barrings (see p. 66).
The phone number has more Check phone number.
than 20 digits.