Download Compact T1 - Black Box
Transcript
Configuration
Basic System Setup
Set Up the Router Card
The following is the basic setup, see the Adit Router User Manual or Quick Start
Guide for the following configuration setups:
l PPP Internet Connection and Public IP Address Routing
l Frame Relay Internet Connection and Public IP Address Routing
l Internet Connection using PPP, NAT/PAT and Firewall Filters
l Internet Connection using NAT and Static NAT Addresses
l PPP Internet Connection and Public IP Address Routing
l Back-to-Back with PPP
Command
Description
set {ds0-addr} type data
Confirm DS0 is set to type data.
ds0-addr = {slot:port:channel} of DS0
Example: set a:1:1-24 type data
connect {slot:port:trunk}
{slot:port:channel}
Cross-connect T1 to router card.
Example: connect a:1:1-24 6:1:1 (router in slot 6)
set {router-addr} proxy
Disable/enable router proxy.
router-addr = {slot:port}| of router card.
Example: set 6:1 proxy disable.
set {slot:port} up
Set Router LAN as In-Service.
Example: set 6:1 up
telnet {router_card-addr}
Telnet to Router card.
router_card-addr = {slot} location of router card
Example: telnet 6 (if earlier than 3.0 release {slot:port}
must be used)
Local and Remote Profile Setup
reinitialize
Compact T1 - Release 6.1
To enable any configuration changes, the card must be
reinitialized.
4-7
Related documents
GetacSecret Confidential Document
Carrier Access Network Device Axxius 800 User manual
MASTERseries Quick Start Guide 6.01
Black Box Compact T1 MT850A User manual
ZXR10 2920/2928/2952(V1.0) Access Switch User Manual (Volume I)
LOOP-AM MODEL 3440 Wideband Access DCS-MUX
NMS ISDN Installation Manual
Carrier Access Network Device Axxius 800 User manual
Carrier Access CMG Router User manual
Carrier Access EdgeFLEX Computer Hardware User Manual
- D-Link
TSR Router Menu-Driven User Interface User Manual 2.97