1
Download Compact T1 - Black Box
Transcript
CLI Commands
show
show (router-lan) filter
The show (router-lan) filter command displays the current LAN Layer 2 data filters applied to
the LAN on the specified Router card.
Syntax: show {rtr-addr} filter [address|all|custom|protocol]
Example: show 5:1 filter
> show 5:1 filter
SLOT 5:
LAN Filters Enabled for Adit50:
Forward Mode: Forward ALL Frames NOT Matching Filters
Filter Type
----------Protocol
Protocol
Total: 2
Source/Dest
-----------
Filter Name
----------XNSrule
XNSrule
Example: show 5:1 filter all
> show 5:1 filter all
SLOT 5:
LAN MAC Address Filters Defined for Adit50:
Total: 0
LAN Protocol Filters Defined for Adit50:
Protocol Name
------------SPANTRE
XNSrule
XNSrule
Total: 3
Ethernet Value
-------------0
807
807
IEEE Value
---------42
0
0
LAN Custom Filters Enabled Defined for Adit50:
Total: 0
5-234
Compact T1 - Release 6.1
