1
Download "user manual"
Transcript
WinCC flexible Engineering System 2.2 WinCC flexible user interface Toolbars The toolbars provide quick access to important, frequently used functions. The following toolbar configuration options are available: ● Adding and removing buttons ● Changing the position 2.2.3 Work area Introduction The work area is used to edit project data either in table format, e.g. the tags, or in graphic format, e.g. a process screen. Description Each editor is opened in a separate tab control on the work area. In the case of graphic editors, each element is displayed on a separate tab control. Only one tab is active when several editors are open simultaneously. To move to another editor, click the corresponding tab. You can open up to 20 editors in parallel. WinCC flexible 2007 Compact / Standard / Advanced User's Manual, 07/2007, 6AV6691-1AB01-2AB0 45
