Download DIGIRACE-MMX 2.01

4. Select the name of the grid the system shall use from the corresponding list.
Displaying the channels in the Real Time mode
You can display the values detected by the various channels in real time. After having sent the
parameters to the device by pressing key
device must be connected and on).
, click on the
icon to open the Real Time screen (the
IMPORTANT: The Real Time mode operates only if the device has been programmed with the same
.DSF parameter file as the one uploaded in DigiRace.
If DigiRace local settings don’t match the device settings it will prompt you to import parameters
from it, while exiting the Real Time mode you can then save a new file, or update an existing file in
the Model folder.
The Real Time mode opens several swatches for the channels active on the device. You can activate or
deactivate their display and arrange them on the screen as you wish.
To quit the Real Time mode, always click on the
icon.
To automatically arrange the swatches on the viewing area click on the
29
icon.