Download PProg User`s Manual

PProg
Device Rights
Figure 41
Inspector will display the list of the device parameters. The only parameter enabled for change is the
“Link a Reader to” parameter (or two parameters “Link a Reader 1 to” and “Link a Reader 2 to” for an
S2000-2). Select the relevant parameter by double mouse clicking opening the dropdown list of controlling devices with their network addresses. Specify that device (the console or the relevant keypad
S2000-К/S2000-КS) which is supposed to control partitions after user authentication by means of presented access device (see Figure 41). The “Unspecified” value means that partition statuses will be
inverted by presenting the access device to the reader (the association of type #2).
The console checks the rights to control partitions programmed for a keypad (the
console) but not for the device reader electronic device was presented to.
The console supports controlling partitions remotely from keypads S2000-К ver.1.02
and above and devices S2000-4 ver. 1.03 and above.
EDITING / DELETING DEVICE RIGHTS
Associations between devices and partition of the Orion system can be released by various ways to
disable rights of the devices to give control commands for partitions.
The following tools provide deleting associations for selected partitions relative to devices (the window
with the tree of the device rights must be active):
o
Drag and drop the selected partition (or the group of partitions) on the Recycle Bin, or
o
Press the Cut button, or
o
Press <Delete> on the keyboard, or
<Del>
115
www.bolid.com