Download PProg User`s Manual

Orion ISS
You can delete partitions not only one-by-one but also by groups selecting them by <Ctrl>, <Shift>,
and arrow buttons on the keyboard. Deleting the root element
of the partition list results
in deleting all partition descriptors from the console database.
Before deleting the descriptor of a partition (or each descriptor in case of a group operation), the
PProg prompts the confirmation for the requested operation. To disable prompts, unset the Prompt for
Confirmation before Deleting flag on the Operations tab of the Options menu.
Deleting a partition will lead to:
9 Deleting the partition from all partition groups the partition can be involved to
(see Section Groups of Partitions)
9 Excluding the partition from a list of partitions which are available for being controlled by users of access groups assigned to this partition (see Section Access
Groups of this Manual)
9 Excluding the partition from a list of partitions of all the management scenarios
the partition is involved to (see Section Management Scenarios of this Manual)
9 Deleting all the associations of the partition with relays (see Section Relays of
this Manual)
9 Releasing the links of this partition with the devices translating events from the
Orion system (see Section Event Translation of this Manual)
9 Deleting all the associations of the partition with the devices which are permitted
to control the partition (see Section Device Rights of this Manual)
REDEFINE AN ADDRESSABLE INPUT OF AN S2000-KDL AS AN OUTPUT
Unlike most of the Orion system devices for which input zones and relay outputs are physically different components, the polling loop of an S2000-KDL controller has 127 versatile addressable zones
each being able to operate both as an addressable monitored input and as an addressable executive
output.
By default, all addressable zones of an S2000-KDL are considered to be monitored inputs. If you
need an addressable zone of the S2000-KDL to be treated as an executive output (when an S2000SP2 relay module is connected to the polling loop of the S2000-KDL), you can logically redefine this
addressable zone on the Partitions page of the PProg.
www.bolid.com
62