1
Download User Guide - GarrettCom
Transcript
10 ***PPP IP Address Configuration*** Last changed: 6-7-02 11:26:45 The PPP Application Base IP Address: 0.0.0.0 Number of Users: 0 (255 Max) 1 Main Menu Configuration ________[DynaStar_3614]_________ Process selections (Y/N): Y Use TAB & CURSOR keys to move among fields. Press ESC to abort command & exit Router IP Addresses for PPP Figure 10-6 PPP IP Address Configuration Screen 4. Enter the IP address in the Base IP Address field and enter the number of users allowed to use this address. If this number is exceeded, additional calls using this address will be cleared. 5. In the Process selections field, enter Y <return>. CONFIGURING THE PPP DIAL DIRECTORY Parameters for dial destinations are configured on the PPP Dial Directory menu. On this menu, you also assign a location name as an identifier for the destination. This name will then be displayed on the Dial Directory and Call Control menus. Before you can configure the dial entries, you must first have configured a port to handle the PPP protocol, as explained in the previous section of this chapter. To configure dial directory entries: 1. From the Main menu, select Configuration. 10-12 The Configuration Commands menu is displayed.
