Download Section 16 CREATING A FIELDBUS STRATEGY BY USING

Transcript
Creating a Fieldbus Strategy by using DF51
OPC Client (HMI)
OPC Update Rate
DFI OLE Server
(OPC Server)
Update Time
DFI302
Background Time,
Supervision Time &
MVC
Field
Device
Figure 16. 35 – SYSTEM302 Architecture
The next steps must be configured in order to get a better and optimized time for each system.
Background time
One of the first parameters to be set is Background time (or Background traffic). The Syscon
calculates the macrocycle according to the number of links in the configuration and allows the user
to add a Background time. A minimum value is automatically set by Syscon, and must be calculate
to have an ideal background to each Fieldbus Network.
The Background time is calculated based on the formula used for the Fieldbus macrocycle. The
macrocycle is composed of Operational and Background traffics.
The ideal macrocycle for non-Redundant Systems is:
Ideal macrocycle non-Redundant = ((30*NDEV)+(30*NEL))*1.2
The ideal macrocycle for Redundant Systems is:
Ideal macrocycle Reduntant = ((60*NDEV)+(30*NEL))*1.2
Where,
NDEV is the Number of Field Devices in the Fieldbus Network
NEL is the Number of External Links (between Field Devices)
After you know the ideal macrocycle, go to Fieldbus Attributes on Syscon and adjust the
Background Traffic to the new and acceptable value.
IMPORTANT
Once adjusted in every Fieldbus Channel, run a complete configuration download.
16.19