Download Manual - Equipco

Voyager User’s Guide
•
Peak Labels option selects the peak labels that are displayed on the graph.
None displays no peak labels.
Numbers will number each integrated peak.
Labels will display the peak name if the peak can be identified.
Numbers and Names displays a number and the peak name.
•
Turn the Status Block on or off.
The status block displays the signal level and the slope of the signal at a time
defined by the position of the cross-hair. The cross hair does not need to be
directly on the signal.
•
Previous Zoom, Auto Range and Normalize all allow you to view the
chromatogram in different ways.
•
What’s This allows you to get on-line help for the reference chromatogram.
Loading a New Reference Chromatogram
To load a new reference chromatogram:
1. Select the Assay tab.
2. From the File menu select Open and open the .PID or .ECD file containing the
chromatogram that you want to display.
When the file is loaded, the chromatogram will be displayed in the graph block.
This file may be independent of the selected column/detector combination and
the library.
NOTE: Before making any changes to the assay, ensure that the displayed chromatogram
was run on the same instrument using the currently selected column/detector
combination.
118