Download Manual - Equipco

SiteChart Software
General Installation Information
To install SiteChart you must have a 3.5” disk drive and 5 megabytes of free hard
disk space. The Setup utility detects minimum system requirements and warns you
if your system does not meet the requirements.
There are a few things you can do before you begin to ensure installation goes
smoothly.
•
Turn off any virus protection software you are using, as it may interfere with
the Setup utility.
•
Exit any Windows programs you are running, this frees up memory for
installation and prevents possible conflicts between Setup and other programs.
Installing the SiteChart software
NOTE: The following instructions assume you are installing from drive A onto drive C. Run
the Setup program from the 3.5” drive and install the SiteChart software onto the
hard drive. The default directory is c:\Program Files\SiteChart\Program, if you are
installing to or from a different drive, substitute the appropriate drive name in the
following procedure.
1. Start Windows.
2. Insert SiteChart Disk #1 into the floppy drive.
3. Select Run from the Start menu.
The Run dialog is displayed.
4. Type a:\setup, as shown below, and click OK.
The installation choices are displayed.
103