Download View Manual

Figure 96.
10.7
More detailed statistics
Design Guidelines and Limitations
10.7.1 Destination/Source MAC match type
To use the destination MAC match type, you have to create a bridge
interface and assign to it the desired physical interface (a single interface
is ok). Then, you can use the destination MAC match type of the interface
assigned to the bridge.
Also bear in mind that, on a regular ip network, all receiving packets on
the gateway, have as destination mac the gateway's mac address.
Similarly, all packets forwarded by the gateway, have as source mac the
gateway's mac address. Hence, it's pointless to use these fields on a
NETKROM OS powered AP, which acts as a gateway.
Page 123 of 181
NETKROM OS and NETKROM
NMS User Manual