Download SCADAPack E Operational Reference Manual

28
4.6
SCADAPack E Operational Reference Manual
RTU Configuration Revisions
The SCADAPack E RTU provides a revision number tracking facility for RTU configurations. The
following rules are applied when configurations are changed. The RTU maintains the configuration
revision numbers in non-volatile RTU memory.
For further information see the SCADAPack E RTU Configuration Technical Reference Manual.
CONFIGURATION MAJOR REVISION NO.:
CONFIGURATION MINOR REVISION NO.:
System Analog Point 50050
System Analog Point 50051
The CONFIGURATION MAJOR REVISION NUMBER is updated under the following conditions:
When the SCADAPack E RTU configuration is built, or re-built with a complete configuration (.RTU
file), the Major Revision Number is incremented by 1
If the Major Revision Number is written via System Analog Point 50050
The CONFIGURATION MINOR REVISION NUMBER is updated under the following conditions:
When the SCADAPack E RTU configuration is built, or re-built with a complete configuration (.RTU
file), the Minor Revision Number is reset to 0
When the RTU configuration is updated with an incremental configuration (.INC file), the Minor
Revision Number is incremented by 1
When a Record Exchange modification is made to the RTU database for Point record attributes *, or
Trend records
If the Minor Revision Number is written via System Analog Point 50051
Record exchange configurations individually made to the following point attribute fields result in the
Minor Revision Number not incrementing.
Point Alarm Inhibit attribute
Point Trend Inhibit attribute
Point is Bad attribute
The SCADAPack E Configurator does not individually change attributes, so the Minor Revision Number
is updated, regardless of which attributes are modified.
For more information on Record Exchange see the SCADAPack E RTU Configuration Technical
Reference manual.