Download DaDplus User Manual

Transcript
2.1.4 Connections to the FD-24 Audio Dubber
The diagram below shows all the connections to the rear panel.
RS-232 Port
Time Code Input/Output
SCSI
Used for computer connection, DaDView interfacing
and debugging.
Used for longitudinal time code.
Used to connect extra hard
or magneto optical disks.
House Sync
Audio Outputs
Control Network Ports
Power Input
Video, 256xFS or
word clock sync
reference input.
Both analogue and digital
(AES/EBU) outputs are
available on different
connectors. Each connector
handles 4 mono outputs.
One port is used for the
incoming control signal, and
the other to pass this signal
along to the next unit. The
control network allows
multiple units to be connected,
forming a "daisy chain"
between units.
Senses voltage
automatically.
Note: On Dubber systems fitted with fewer than 24 playback channels, connectors are provided only for the
audio channels that are present.
5
DaDplus User Manual