Download RTDAQ Real-Time Data Acquisition Software

Section 10. Utilities
Code
Message Text
48
Set variable
failed
50
Program file
send start
51
Program file
send status
52
Program file
send complete
53
Program file
send failed
54
Program file
receive start
55
Program file
receive status
Program file
receive
complete
56
10-68
57
Program file
receive failed
64
Device restore
from file
succeeded
Message Parameters
Message Meaning
The datalogger failed
to acknowledge the
set variable message.
The server is sending
a program to the
datalogger. The
actual program
segments will appear
as BMP1 message
type 4.
The datalogger has
received the program
segment.
The datalogger has
compiled the
program.
The datalogger did
not acknowledge the
receipt of the
program, the program
did not compile, or
communications
failed with the
datalogger.
The server is
requesting the
datalogger program.
The actual program
segments will
appears as BMP1
message type 5.
A program segment
has been received.
The datalogger
program has been
received from the
datalogger.
The datalogger failed
to send the program
or communications
with the datalogger
failed.
On server startup a
device previously
entered in the
network map has
been restored.
User Response to
Message
If the program did not
compile check the error
messages. Otherwise,
check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.
Check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.