Download PC208W Datalogger Support Software

Section 5. Stg Module: SMS - Storage Module Software
7026 or
SC25PS
Cable
COM Port of a PC
AC/DC
Adaptor
SC532
SC12
Cable
Storage Module
or 12V DC
FIGURE 5-2. Connecting the Storage Module to a PC using an SC532 Interface
If your computer is fitted with a PC card reader supporting Card Services
protocol, SMS can be used to interrogate the memory card in a similar way to
interrogating a card in the CSM1/MCR1 Storage Module. Please see Appendix
D for specifications and requirements for PC Card support.
Start SMS by clicking on the Stg Module button of the PC208W toolbar. The
first time you use the program it will show the screen for the CSM1/MCR1
Card Storage Module as in the screen in Figure 5-3.
5.2.1 The Setup Screen
The SETUP screen shown in Figure 5-3 is used to set the Communications
(COM) Port and Baud Rate before communications between the module and
computer are established.
FIGURE 5-3. Typical SETUP Screen and StatusBox for the CSM1/MCR1 Module
PC208W, Version 3.3, Instruction Manual
5-3