1
Download Operating Manual
Transcript
Connection Connecting to a current source output circuit Controller Driver 24 VDC IN0 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ 4.7 kΩ 2.2 kΩ IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN-COM [0-7] 0V 24 VDC IN8 IN9 IN-COM [8-9] 0V 12 to 24 VDC R0 10 mA or less OUT0 R0 OUT1 R0 OUT2 R0 OUT3 R0 OUT4 R0 OUT5 0V Output saturated voltage 3 V max. OUT-COM ASG+ ASGBSG+ 26C31 or equivalent BSGGND 0V Note 0V Use input signals at 24 VDC. Use output signals at 12 to 24 VDC, 10 mA or less. If the current exceeds 10 mA, connect an external resistor R0 so that the current becomes 10 mA or less. The saturated voltage of the output signal is 3 VDC maximum. −21−
