Download Operating Manual

Introduction
 General specifications
Degree of protection
Ambient
temperature
Humidity
Operation
environment
Altitude
Surrounding
atmosphere
Ambient
temperature
Storage
Humidity
environment
Shipping
Altitude
environment
Surrounding
atmosphere
IP10
0 to +55 °C (+32 to +131 °F) * (non-freezing)
85% or less (non-condensing)
Up to 1000 m (3300 ft.) above sea level
No corrosive gas, dust, water or oil
−25 to +70 °C (−13 to +158 °F) (non-freezing)
85% or less (non-condensing)
Up to 3000 m (10000 ft.) above sea level
No corrosive gas, dust, water or oil
* When installing a driver on a heat sink. [material: aluminum, 200×200×2 mm (7.87×7.87×0.08 in.) equivalent]
Insulation resistance
Dielectric strength
−4−
100 M or more when 500 VDC megger is applied between the
following places:
 PE terminal - Power supply terminals
 Encoder connector - Power supply terminals
 Signal I/O terminals - Power supply terminals
Sufficient to withstand the following for 1 minute:
 PE terminal - Power supply terminals 1.5 kVAC 50/60 Hz
 Encoder connector - Power supply terminals 1.8 kVAC 50/60 Hz
 Signal I/O terminals - Power supply terminals 1.8 kVAC 50/60 Hz