Download User manual

3.3.4.3.2.- Digital Measures
On selecting this function, the meter will go to the digital measuring mode, selecting as a main
measure the last one applied by the user.
3.3.4.3.2.1.- Power
Using this function, the measure of power is selected as a main measure, and will be seen at
the bottom right of the screen. In this measure, the meter combines the power of the signal
comprised between the central frequency minus half the bandwidth of the channel and the
central frequency plus half the bandwidth of the channel.
To ensure this measurement is correctly made, we must select the correct bandwidth.
- Power of a digital channel -
3.3.4.3.2.2.- C/N
On selecting the C/N measure, the meter will show at the lower right of the screen the Channel
Power / Noise Power ratio.
Analyzer
126