Download User manual

3.3.4.3.1.4.- Field Strength
Operation similar to paragraph 3.3.3.2.1.5 field strength.
3.3.4.3.1.5.- Bandwidth
This parameter is necessary for the proper measurement of the C/N, since it will be used to
correct the value of the noise level measured, so as to reference it to the whole bandwidth of
the channel.
When it is selected, it will be seen at the bottom right of the screen, and the measure selected
will momentarily disappear.
With
or the cursors
using the keys
or
/
we can vary this parameter, and confirm the value by
.
- Bandwidth change -
Analyzer
125