Download User manual
Transcript
3.3.2.2.1.- Energy Management With this function one can select from three different unit operating modes. The three possible modes are: Normal: The meter´s standard operating mode. Energy-saver: In this mode and using the information offered by the light sensor, the brightness of the screen backlight is reduced and various electronic parameters are adjusted, which increase battery life. AUTO: If the meter is not connected to an external power supply, it operates in a similar way to the energy saver mode. When the unit is connected, it operates in the same way as the NORMAL mode. - Energy management - 3.3.2.2.2.- Automatic Sleep Mode The unit has a sleep option which can be programmed to activate once the idle time has lapsed. The idle time can be programmed from 1 to 59 minutes. The user may also deactivate this function (OFF). The default idle time is set at 10 minutes. Once the idle time has lapsed the meter will enter sleep mode. The screen will turn off and the flickering LED lights will indicate this status. Pressing any key on the meter will make it return to normal mode in less than 1 sec. 3.3.2.2.3.- Automatic disconnecting The equipment offers the option of automatic disconnecting after a programmable period of inactivity. This period can be of between 1 and 59 minutes. The user can also disable this function (OFF). The equipment default value is 15 minutes. Equipment Config. 69