Download MIDI - Deep!sonic

SELECTING SOUNDS
If modifications have been made to the current Performance, selecting the same Performance, a different Performance, or
one of the sequencer control buttons (RECORD, PLAY, STOP, <<, >>) will restore the original Performance. To conserve the newly
assigned Sounds to the tracks, save the Performance to memory (s. Main display / Save Performance).
Selecting Sounds with the Dial (or the +1/>
and -1/< buttons)
The selection is confirmed with ENTER:
This method is used with the main display is showing
“Sounds” mode.
The Sounds are arranged in a list which can be continuously scrolled forwards or in reverse order by rotating
the DIAL.
•
rotate to the right to scroll the Sounds forwards;
•
rotate to the left to scroll the Sounds in reverse order.
The +1/> and -1/< buttons operate in the same manner
as the DIAL but in single steps.
1. Select the track to which the Sound is to be assigned
in the track column.
2. Select the Sound.
Selecting Sounds directly from the Sound
Library
The Sounds are stored in the Sound Library, where they
reside in order of Sound Family and identified by the
Program Change and Bank Select numbers. The standard Sound Library is shown in the Appendix.
1. Access the Sound Library by pressing the
SOUND
LIBRARY button:
Selecting Sounds with the alphanumeric
keypad
The method can be used when the main display is in
“Sounds” mode.
The Sounds are identified by a Program Change number
(1~128) and by a Bank Select number (1~16). The
Program Change and Bank Select numbers found in the
Sound Library are listed in the Appendix.
1. Specify the Program Change number.
2. If necessary, select, in the track column, the track to
which the Sound is going to be assigned.
3. Scroll to the Family of the Sound that you are looking for using the MULTIFUNCTION BUTTONS . For example, the “Guitar” Family:
2. Insert the separating “dash” (the minus ‘-’ symbol).
3. Specify the Bank Select number.
4. Confirm the selection with
ENTER.
To select the Sounds with Bank Select=1 it is sufficient
to specify only the Program Change number, without
the Bank Select number.
For example, to recall Sound “Vibes2 [12-3]”, select the
Program Change number 12 and the Bank Select number
3:
4. Rotate the DIAL to select the required Sound (rotate to
the right to scroll forwards).
5. Press ENTER to assign the Sound to the selected track.
6. Escape from the Sound Library by pressing
or SOUND LIBRARY.
You can select the Sounds in the Sound Library by
specifying the Program Change-dash-Bank Select
combination on the alphanumeric keypad (as in the
previous case).
46
USER INTERFACE / SELECTION
NORMAL