1
Download ISDN Basic Rate Interface Feature Fundamentals
Transcript
1057 SDID Number as CLID for EuroISDN Trunks Contents This section contains information on the following topics: "Applicable regions" (page 1057) "Feature description" (page 1057) "Operating parameters" (page 1058) "Feature interactions" (page 1059) "Feature packaging" (page 1059) "Feature implementation" (page 1060) "Feature operation" (page 1061) Applicable regions The information presented in this section does not pertain to all regions. Contact your system supplier or your Nortel representative to verify support of this product in your area. Feature description The following is a description of the SDID number as CLID for EuroISDN Trunks feature. SDID capability is available for EuroISDN calls that have CLID OPT1 enabled. For BRIE interfaces, the OPT1 option is configured at the CLID prompt in LD 16. For PRI2 interfaces, the OPT1 option is configured at the CLID prompt in LD 17. The Send DID Number (SDID) feature sends the Direct Inward Dial (DID) number of a specific DN as Calling Line Identification (CLID) on an outgoing trunk call. SDID replaces the internal DN of the phone with the DID (external DN) of the phone. The DID number is obtained from the Incoming Digit Conversion (IDC) table. Nortel Communication Server 1000 ISDN Basic Rate Interface Feature Fundamentals NN43001-580 01.02 Standard Release 5.0 20 June 2007 Copyright © 2003-2007, Nortel Networks .
