Download USP-2 Hardware Manual
Transcript
8. Connectors and Pinouts Table 8-7. VMEbus P1 connector description (system board). (Continued) 8.3.1 Pin # Row A Row B Row C 22 Connected to A21 (IACKIN=IACKOUT) NC NC 23 NC GND NC 24 NC GND NC 25 NC NC NC 26 NC NC NC 27 NC NC NC 28 NC NC NC 29 NC NC NC 30 NC NC NC 31 NC NC +12V 32 +5V +5V +5V VMEbus P2 Connector (System Board) The VMEbus P2 Connector accommodates user-defined signals on row A and C. The optional paddleboard is one way of easily accessing the USP-2 VMEbus P2 Connector user-defined signals. . Table 8-8. VMEbus P2 connector description (system board) Pin # Row A Row B Row C 1 +5V +5V +5V 2 GND GND GND 3 NC NC SCSIB_TRMPWR 4 GND NC SCSIB_ATN_L 5 +5V NC SCSIB_BSY_L 6 +5V NC SCSIB_ACK_L 7 +5V NC SCSIB_RST_L 8 NC NC SCSIB_MSG_L Parallel Port Floppy Port 9 PP_STRB_L NC NC SCSIB_SEL_L 10 PP_ACK_L FD_DEN_SEL NC SCSIB_CD_L 11 PP_BUSY FD_INDEX NC SCSIB_REQ_L 12 PP_PE FD_MOT_EN GND SCSIB_IO_L 13 PP_ERROR_L FD_DRV_SEL +5V SCSIB_DAT(0) Themis Computer 8-9