Download 4.6MB PDF - Ashlar
Transcript
Drawing Tools - Description and Use 2. Click the first point on the circle. Notice that the Message Line displays the next step for using the tool. 3. Drag or click the second and third points. (Dragging displays the rubberband circle.) If you place any of the three points on an existing object, the circle is drawn through that point. If you click an object while holding down the CTRL (Windows) or OPTION (Macintosh) key, the circle is drawn tangent to the object rather than through the indicated point. You may combine the placement of these points to create a circle through a specific point of one object and tangent to another object, or a circle tangent to three objects, or any other combination. If you drag the first two points, a rubberband image guides your construction. The Status Line indicates the X,Y coordinates for each of the three points. X1 Y1 X2 Y2 X3 Y3 Tangent-Point Circle Tool This tool, in the fourth subpalette of the main tool palette, draws a circle tangent to the two objects you indicate. Using the Tangent Circle Tool 1. Select the tool. The Message Line reads, Tangent Circle: Enter diameter then pick first tangent object. 2. You can enter a diameter for the circle in the status field. D .5 3. Click the objects to which the circle is to be tangent. Ellipse Tools The Ellipse tools on the tool palette construct ellipses inscribed within an invisible rectangle or parallelogram by any of four methods: • 2-Point Center • Opposite-Corner 7-17
Related documents
DraftBoard Unlimited : Reference Guide
Escene SayHi PS760-W Instruction manual
Guia do Usuário da SISTEMA DE CÓPIAS DE FORMATO LARGO
File - EOS magazine shop
masonry - DepED
New Products
Samoa training report, capacity building in flood risk
Field Guide
Cubolink Help
About CADAM Legal Disclaimer
DraftBoard Professional 4.1 : User Manual
GibbsNews Fall 2011 Issue