Download 1 - Elhvb.com

Chapter 4 BIOS Setup
4-6.9 Frequency/Voltage Control
Run the “Frequency/Voltage Control” as following:
1. Choose “Frequency/Voltage Control” from the Main Menu and a
screen with a list of options will appear:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Frequency / Voltage Control
Redstorm Overclocking Tech
CPU Vcore Select
AGP Vcore Select
DIMM Vcore Select
Auto Detect DIMM/PCI CLK
Spread Spectrum
CPU Clock
CPU Ratio
Press Enter
Default
1.5V
2.5V
Enabled
Disabled
100MHz
X 8
Item Help
Menu Level
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys.
<F1>: “Help” gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. The following item descriptions are provided as a quick
guide to your setup.
Redstorm Press <Enter> to start RED STORM OVERCLOCKOverclocking ING TECH. This option gives user an easy way to
Tech overclocking. It will increase CPU external clock
automatically. When CPU external clock increases
to an unacceptable value, BIOS will restart your
system, then running at an acceptable CPU external clock.
83