Download OpenPowerNet User Manual
Transcript
OPN/51/1.5.3 Page 136 of 232 User Manual Issue 2014-11-05 Sum P, Q, S = f(t) 14.00 12.00 10.00 P, Q, |S| 8.00 6.00 4.00 2.00 0.00 -2.00 00 01:00:00 00 01:10:00 00 01:20:00 P_total [MW] 00 01:30:00 00 01:40:00 Q_total [MVAr] |S_total| [MVA] 00 01:50:00 00 02:00:00 Figure 131 The power demand of substation TSS_5 for the 2AC network. Now we will compare the power demand for the AC network in Figure 115 with Figure 131 for the 2AC network using Excel-File PowerSupply2AC.xlsx. We see the power demand for the 2AC network is much higher than for the AC network. This is the case because for the AC network we have two substations and for the 2AC network only one substation and one auto transformer station. Therefore TSS_5 has to supply the total power and losses in the 2AC network. Another comparison can be done for the energy consumption. Figure 132 shows the energy consumption of the AC network provided from both substations and Figure 133 for the 2AC network provided only from TSS_5. E = f(t) 3.000 2.500 E [MWh] 2.000 1.500 1.000 0.500 0.000 00 01:00:00 00 01:10:00 00 01:20:00 00 01:30:00 00 01:40:00 00 01:50:00 00 02:00:00 Sim: 1; Network: A-C; Substation: TSS_5; Power Supply: T1; Ref erence U: Rails_BB; Compared U: OCS_BB Sim: 1; Network: A-C; Substation: TSS_80; Power Supply: T1; Ref erence U: Rails_BB; Compared U: OCS_BB Figure 132 Energy supply from both TSS of the AC network in default configuration. IFB DD, UM_OPN_51_01.05.03.docx Page 136 of 232 DMJ, 2014-11-05