Download Flow Control User Manual

SystemConsoleSwitch User Manual
5.4
Using the Printer commands
There are two printer commands on the SCS. One command allows the user to print the
Help Menu, and the other command allows a printout of spooled information for any
channel.
The print commands are:
PSn
PH
PH
=
=
=
Print Channel LineS n
Print Help Screen
Print Help Screen
Prints the Help Menu, whether it is displayed or not.
PSn
=
Print Channel LineS n
The user must first select the channel he wishes to print from. The PSn command causes
"n" lines of spooled data for the specified channel to be printed. For example, to print out
8 lines of data, the user would type:
PS8 ↵
The data to be printed will start at the top of the currently displayed page.
After the PSn command has been entered, the user is given the option of setting printer top
of form. The SCS displays:
Set Printer Top of Form (Y/N)?
If the user wishes to set the top of form, enter Y ↵. This will reset the
SystemConsoleSwitch's internal line count. Physically reset printer paper as necessary,
and perform printer top of form procedures. This will vary from printer to printer.
24