Download User Manual - GDC Technology

UNDERSTANDING THE USER INTERFACE

Sequence Name
Shows the name of the audio sequence that will be playout/copied to the Target
specified on the Playback Config/Config page. By default, it shows the name of the audio
sequence that is associated with the selected video sequence. You may however
choose to playout/copy another audio sequence with the selected video sequence. Press
[] to see full list of audio sequences available in the encoder and select the audio
sequence you want.

Num Channels
Displays the number of channels of the selected audio sequence. Not to be altered.

Num Bits
Displays the number of bits per audio sample. Not to be altered.

Frequency
Displays the sampling rate of the audio sequence. Not to be altered.

Format
Displays the file format of the audio sequence. Cannot be altered.

Audio Delay
Use the keypad
to specify audio delay.
Example 1:
Audio delay = ‘+6’ delays the audio by 6 frames. This means the audio starts 6 frames
later than the video.
Example 2:
Audio delay = ‘-6’ advances the audio by 6 frames. This means the video starts 6 frames
later than the audio.
DSRTM DSR EN-2000 Encoder
User Manual
28
11 February 2008