Download Model 500 - Southeastern Automation
Transcript
MODEL 500 JUN 2 0 0 5 (b) Observe the same recommendations for minimum clearance: 16 inches (41 cm) in front enclosure opening and access, and 15 inches (38 cm) at the rear and left side for case removal. (c) Refer to drawing CE-23878 in the Analyzer drawings addendum of this manual. (4) Ensure that exposure to radio frequency (RF) interference is minimal. 3.2.3 Unpacking the Unit 1 Observe Precautions and W arnings 2 Plan Site Location 3 Obtain Supplies and Tools 4 Install Analyzer W iring » Observe the following checklist for unpacking the unit and inspecting for damage: (1) (2) Unpack the equipment: (a) Model 500 series Analyzer (b) GC Controller Ensure that all documentation and software are included: (a) This manual, the Model 500 Gas Chromatographs Hardware Reference Manual, P/N 3-9000-537. (b) The software manual, MON2000 Software for Gas Chromatographs User Manual, P/N 3-9000-522. (c) CD(s) with the MON2000 software program and GC Applications. INSTALLATION AND SETUP 3-15